Concrete Services

Concrete Leveling Solutions

If your concrete slab is sinking or uneven, you need an effective concrete leveling solution. Uneven concrete can be dangerous to walk on and cause structural issues, such as cracks or voids in the slab.Concrete Leveling

Depending on the problem, you may need to either repair your concrete slab or replace it completely. However, if you act quickly enough, concrete leveling is usually an affordable and effective way to get your slab back in good shape. Then contact Concrete Contractors Dallas TX for professional assistance.

Slab jacking is a popular concrete leveling method that uses a series of holes to lift the slab. The holes are filled with a mixture of cement slurry, mud, or other material to raise the sunken concrete.

Slab jacking has been around for years, and it is an effective way to repair damaged concrete. It is also a low-cost option for many homeowners and businesses.

When a home or commercial building has a concrete slab that is not level, it can be a serious issue. This is because a concrete slab is a primary structure in a home or business, and it has the potential to fail if not maintained properly.

In order to avoid this problem, it is important to understand how concrete leveling works. Once the surface of the concrete is level, it can be used as it was intended to be used.

To achieve this, a contractor must use a specialized piece of equipment. The jacking pump is a device that can inject a thick layer of slurry under the slab to lift it up.

The slurry is made of a mixture of limestone, portland cement, and water. This mixture is pumped beneath the slab, and it is designed to fill any voids that are present in the soil under the concrete.

When the slurry is injected under the concrete, it exerts an even pressure across the entire surface of the slab. The slurry has a high density that allows it to lift the slab up to its original height.

In addition to lifting concrete, the slurry will also stabilize the soil beneath the slab indefinitely. This is especially true if you have a concrete slab that is located near a lake, river, or stream.

Another reason that concrete slabs can become level is because of erosion or a change in the environment around the property. This can occur due to tidal changes in harbors and waterfront areas, soil compaction, or a variety of other factors.

If you have a concrete slab that is leveling, it is important to contact a professional for help. The right contractor can fix your problem, saving you money and time.

Leveling sunken or uneven concrete slabs with polyurethane foam is a much easier and less expensive method than using grout to lift them. The material is injected into small, dime-sized holes that are strategically drilled onto the surface of the concrete.

In addition to being able to level sunken or uneven concrete, this technique can also be used to stabilize a foundation. Foam can be injected into voids under the concrete slab to fill them, and it is also great for stabilizing a foundation that has settled due to weather and soil conditions.

A common problem with sinking and settling concrete is voids that form under the concrete slab. These voids are created by a variety of causes, including expansive soil and weather conditions.

These voids can actually compromise the structural integrity of the concrete and cause the slab to crack and sink further down. When a professional levels a foundation with polyurethane foam, they can fill these voids with the polyurethane and prevent them from happening again.

Once the foam is injected, it will begin to expand and fill the voids under the concrete. The foam will then start to lift and level the concrete slab.

This type of repair can be done to concrete driveways, sidewalks, pool decks, and patios, as well as basements. It’s fast and easy and can be completed in just a few hours.

After the repair is complete, the work area can be cleaned up, and you can drive on the repaired slab about 15 minutes after it has been cured. This is a much faster process than mud jacking or replacing the concrete slab, which can take weeks or even months to complete.