Flooring Services

Flooring Sanding, and Refinishing Can Save You Hundreds of Dollars

Whether you’re a DIYer or want to save a few bucks, sanding and refinishing your wood floors is simple. If you do it right, you can save yourself hundreds of dollars. Floor Refinishing┬áis an effective way to restore the appearance of an older or damaged wooden floor. It can also help prolong the flooring material’s life.

Flooring ServicesFlooring sanding is smoothing and refining a wooden floor’s surface through specialized sanding equipment. The process typically involves removing the top layer of the floor’s finish, including stains, scratches, or other surface imperfections. Once the surface is smoothed, the flooring can be stained, sealed, or refinished to give it a refreshed appearance.

Ideally, it would be best to sand your floors with coarse-grit sandpaper to remove previous layers of varnish. This prevents stains and dirt from moving across the paper, which will make it easier to remove them later on.

A pristinely clean floor is essential to the success of any professional floor sanding job. Remove all furniture from the sanded rooms, vacuum and dust mop the floor. Before sanding begins, protect your baseboards and joints of walls with painter’s tape. This prevents damage to your walls, and makes the sanding process easier.

Sanding can cause a lot of dust and particles to be released into the air, so wear proper breathing protection while sanding. You can use a small paper mask or even a respirator.

When sanding hardwood floors, you need to ensure that the surface is perfectly smooth and free of any irregularities. This can be a difficult task to achieve on your own, so it’s best to hire a sanding company to do the work for you.

Sanding a hardwood floor is not only physically difficult but can also be extremely time-consuming. It takes a bit of commitment and a good dose of determination but it is well worth it in the end.

First, thoroughly empty the room and remove any furniture or other items from the floor. You don’t want a dust or debris buildup in the room because this will make the job much harder.

You’ll also need to protect your eyes, ears and nose with a suitable face mask or a pair of gloves as all the sanders will generate lots of dust.

Use a drum sander with the wood grain and grits of 60, 80 or 100-grit sandpaper in a series of long passes, overlapping each pass by an inch or two to avoid gouging the floors. Work in small sections, one at a time, and change the sandpaper often to ensure that you are using the correct grit.

Floor refinishing involves sanding down an old finish, staining the wood and coating it with a new coating. It’s often a cheaper alternative to replacing the floor, but it also takes time and effort.

It’s also not a job for the amateur DIYer; it requires several types of sanders and other equipment, including an orbital sander or drum sander. Unless you’re experienced in carpentry, it’s best to leave this project to a professional.

Using a sanding pad and a random-orbital sander, you’ll make numerous passes over your floor to smooth it out and remove any remaining blemishes or scratches. Start with a coarse sanding paper like 36-grit.

When working with engineered hardwood, you need to be sure the veneer is thick enough that you can sand down without reaching the plywood. Trying to sand through the veneer can cause serious damage to the plywood layer. It may not be worth it to risk the expense of replacing the plywood.

Keeping your floors clean and well-maintained can help extend their lifespan, reduce the likelihood of needing costly repairs or replacement, and improve indoor air quality. Regular maintenance can also benefit the environment by using eco-friendly products and methods.

The best way to keep your floors looking new for as long as possible is to sand and refinish them regularly. This can be done using the right products and techniques, and can be an excellent investment in your home or business.

The sanding and refinishing process can be complicated and require the right equipment, training, and knowledge of floor care products. This is why it’s often a good idea to have professional flooring contractors handle your task. Besides the fact that these professionals can do a better job, they will also be able to help you save money in the long run by preventing damage and prolonging the lifespan of your floors.